GE LifeSciences BPG 100/500 Chromatography Column

€2.290,00 * Excl. tax
Article number 6111-1-18110301
Availability: In stock (1)

Refurbished GE LifeSciences BPG 100/500 Chromatography Column

Great condition - great price. 6 months warranty. Worldwide shipment.

GE Life Sciences order code: 18110301

Glass chromatography columns for process development or biopharmaceutical manufacture, designed for hygienic operation and easy, efficient packing.

  • Glass column tube allows efficient and reproducible packing.
  • Material Certificates Reports (BPG MCR) available for ordering.
  • Installation and Operational Qualification Documentation Packages available from GE Life Sciences.
  • Hygienic design and operation. Microbial attachment and growth is prevented through the use of calibrated precision glass, high-grade electropolished stainless steel and an absence of dead pockets.
  • Easy, efficient packing and running with the single-screw adapter.
  • All polymeric materials meet the requirements for USP class VI, described in USP <88> Biological Reactivity Tests, in vivo.

Specifications

 

Parameter BPG 100/500 Column
Adapter Movement Manual 
Autoclavable 121°C for 30 min, except for the bed support 
Bed Height 1-26 cm 
Bed Height Packing With Extension Max.1 35 cm cm
Bed Height Running With Extension Max.2 45 cm 
Bed Support Net 
Bed Volume3 0.3-2 l 
Bed Volume Packing With Extension Max.4 2.7 l l
Bed Volume Running With Extension Max.5 3.5 l 
Column Cross Section Area 78.5 cm² 
Compliance The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity. 
Connections 25 mm TC 
Dimensions 480 x 480 x 1270 mm 
Foot Print 480 x 480 mm 
Inlet Dimension i.d. 4 mm
Material [Bed Support] Polyamid (PA), Polyetheretherketone (PEEK), Polypropylene (PP) 
Material [Column Tube] Glass Borosilicate 3.3 
Material [Lid] 316L Stainless Steel (SS) 
Material [Seal] Ethylene propylene diene (EPDM), Fluoroethenepropene (FEP) 
Material [Stand] 316L Stainless Steel (SS) 
Operating Pressure Max. 8 bar (116.03 psi) 
Operating Temperature 4°C-40°C 
Order Information Stand not included for column sizes 100-200 
Outer Height 1270 mm
Porosity 10 µm, 12 µm, 23 µm and 54 µm 
Surface Finish, Stainless Steel Internal Wetted Glass Ra < 0.4 μm, SS UNS S32205, SS UNS S31803, SS ASTM 316L Ra 0.5 μm 
Surface Finish Stainless Steel Non-Wetted Parts Ra Electropolished 3 μm 
Weight 15 kg

1Values achievable when a packing extension is used for sedimentation of the bed. 75% of the slurry must fit into the column and extension when the adapter is mounted. Bed volumes are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

2Values achievable when the packing extension remains attached to the column for the duration of column use. The adaptor must seal att least 5 cm into the column tube to avoid high tensions in the glass tube. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

3Values achievable without a packing extension. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

4Values achievable when a packing extension is used for sedimentation of the bed. 75% of the slurry must fit into the column and extension when the adapter is mounted. Bed volumes are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

5Values achievable when the packing extension remains attached to the column for the duration of column use. The adaptor must seal att least 5 cm into the column tube to avoid high tensions in the glass tube. Bed heights are based on a slurry concentration of 75% and a packing compression of 15%. Where compression is the difference in volume between a sedimented bed and a bed under pressure.

Sie benötigen ein offizielles Angebot für dieses Gerät? / You need an official quote?

Bitte schicken Sie uns einfach eine / Just send us an Email


Refurbished Lab-Equipment

GENEO - used lab equipment

Used and refurbished labe quipment with warranty. Worldwide shipment.
Gebrauchte Laborgeräte mit Gewährleistung. Weltweiter Versand.
0 stars based on 0 reviews
* Excl. tax Excl. Shipping costs
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »